Import Quicken QIF Files into PennyBolt

Switching to PennyBolt › Importing › Quicken QIF

Yes — PennyBolt reads Quicken QIF files, and one import brings your accounts, transactions, payees and categories across together, not just a flat list of transactions. Transfers between two accounts you exported arrive with both sides linked. You export one file from Quicken, drag it into PennyBolt, review a preview of everything it found, and commit — nothing is written until you do.

What transfers and what does not

What’s in your Quicken file	Comes across?	Notes
Transactions	Yes	Your whole history in one import. The preview shows a count so you can check it against Quicken’s.
Accounts	Yes	Every account in the export. You can untick any you’d rather leave behind.
Payees	Yes	Quicken’s memorized payee list arrives as PennyBolt payees you can attach rules to later.
Categories	Yes, with a mapping step	You confirm how each Quicken category becomes a PennyBolt one, and can create new categories as you go.
Transfers between accounts	Yes, both sides linked	Unless the account on the other side wasn’t in the export — the preview flags those before you commit.
Opening balances	Sometimes	A balance that disagrees with Quicken is nearly always a missing opening balance. You set it once by hand and the register realigns.
Scheduled transactions	No	Not in PennyBolt v1.
Attachments (receipts, PDFs)	No	Not in PennyBolt v1.
Budgets	No	Quicken’s budget definitions don’t come across, and PennyBolt v1 has no budget tool either.
Saved Quicken reports	No	PennyBolt has its own report set .

If you’re coming from Quicken for the first time, read Before you switch first. This page is the data-movement step of that larger journey.

flowchart LR
  Q[Quicken] -->|Export to QIF| F[.qif file]
  F --> P[Drag into PennyBolt]
  P --> R[Import preview]
  R --> M[Map categories]
  M --> C[Commit]
  C --> V[Verify in registers]

The QIF import path, from Quicken to a verified PennyBolt file.

Supported Quicken versions

PennyBolt reads QIF files from:

• Quicken Classic Premier
• Quicken 2013

If you’re on a different version of Quicken, the export may still work — QIF is a long-standing format. We test against these two because they cover most Quicken users asking to switch.

1. Export from Quicken

In Quicken, open File → Export → QIF. In the export dialog:

• Accounts to export: choose All accounts. You want one file that contains everything.
• Date range: choose the earliest date your file has data for, through today. Don’t limit the range.
• Include: transactions, accounts list, category list, memorized payees. Include everything Quicken offers. PennyBolt will ignore what it can’t use, and you’d rather have too much than too little.
• Save as: a name you’ll recognize, in a folder you can find. quicken-export-2026-04-16.qif is a good pattern.

This can take a few minutes if you have many years of history. That’s Quicken, not PennyBolt.

2. Drag the file into PennyBolt

Open PennyBolt on a new file (File → New) or on the file you want to import into. Drag the .qif onto the window, or use File → Import.

PennyBolt reads the file and opens an import preview. For a large history this can take thirty seconds. The preview never changes your file — you can close it and nothing is lost.

3. Read the preview

The preview has four tabs. Walk them in order.

• Accounts. Every account Quicken exported. Check that the names match what you expect. A common surprise: Quicken sometimes exports internal-only accounts you’d forgotten about. Untick any you don’t want.
• Transactions. A count and a sample. Confirm the count roughly matches what Quicken showed — if you had “about 12,000 transactions” in Quicken, the preview should show a number in that ballpark. A count that’s much too low means QIF export missed an account; go back to step 1 and make sure you exported all accounts.
• Categories. The category list from Quicken. You’ll map these to PennyBolt categories in the next step.
• Payees. The list of memorized payees. PennyBolt brings them in as payees you can attach rules to later.

4. Map categories

Quicken and PennyBolt both organize categories as a hierarchy, but the default lists don’t match. The mapping step is where you choose how Quicken’s “Auto:Fuel” becomes PennyBolt’s “Auto → Fuel,” or whether you’d rather it become “Transportation → Gas.”

PennyBolt proposes a mapping for every category. Most are obvious and you can accept them. Look carefully at two kinds:

• Categories you use heavily. If “Groceries” is your largest expense category, make sure it maps to something you can find in reports later.
• Categories with unfamiliar names. Quicken’s internal categories sometimes have names like _IntInc or [Split]. PennyBolt proposes sensible defaults; review them once.

You can also create new PennyBolt categories from the mapping screen — useful when your Quicken taxonomy is richer than PennyBolt’s defaults.

5. Transfers between accounts

A transfer in Quicken (say, paying your credit card from your checking account) is a single transaction that touches two accounts. PennyBolt’s preview shows transfers with both sides, linked.

Edge case: if a transfer’s other side points to an account you didn’t include in the export, PennyBolt can’t link the two sides. The preview flags these with a warning. You have two choices:

• Go back to step 1 and re-export, including the missing account.
• Import anyway, and PennyBolt records the transfer as a one-sided transaction in a dedicated “Unmatched transfers” category. You can reconcile it later by hand.

For a clean first import, re-exporting is the right answer.

6. Commit the import

Click Import. PennyBolt writes every account, transaction, payee, and category into your file. For a large history this takes under a minute on modern hardware.

When it finishes, you’re looking at your full Quicken history inside PennyBolt.

7. Verify, before you trust it

Two quick checks catch almost every import issue:

• Register balances. Open each account. The current balance shown at the bottom of the register should match the balance Quicken showed for the same account. If one account is off, the difference is almost always an opening balance that didn’t come across — set it manually and the register realigns.
• Transaction count per account. In PennyBolt, right-click an account in the sidebar and choose Account info. Compare the transaction count to Quicken’s. An exact match means nothing was lost.

If both checks pass across every account, your import is clean.

What can go wrong

• The preview is empty. QIF export didn’t include transactions. In Quicken, re-export and confirm the “Transactions” checkbox.
• Some accounts are missing. You exported account-by-account instead of all at once. Re-export with All accounts selected.
• Balances are off. Usually a missing opening balance. Open the account, edit its opening balance to the value Quicken shows for the same date.
• Categories look duplicated. Quicken sometimes exports both Food:Groceries and a lone Groceries. The mapping step is where you collapse them.
• A transfer is one-sided. The other account wasn’t in the export. See step 5.

What doesn’t come across

Be honest with yourself about the gaps:

• Scheduled transactions. Not supported in PennyBolt v1. Your QIF export won’t include them and PennyBolt won’t create them.
• Attachments (receipts, PDFs). Not supported in PennyBolt v1.
• Budgets. Quicken’s budget definitions don’t come across. You’d set up budgets from scratch in PennyBolt — but PennyBolt v1 does not include a budget tool either.
• Reports you configured. PennyBolt has its own report set. See Reports .

Don’t have PennyBolt yet?

Your Quicken history ends up in one file on your own computer — no account to create, no bank credentials handed over, and nothing uploaded. PennyBolt isn’t available to download yet: see what it costs and get the download link on day one . It’s $79 once, with a 60-day trial to run this import and check the numbers before you decide.

See also

• Before you switch
• Quicken to PennyBolt, word for word
• What we do differently
• Your first week